TRK-9300 Cap Style Single Stationary Truck
- Cast Aluminum Body.
- Aluminum Pulley on Stainless Steel Axle. Nylon Pulley on Stainless Steel Axle available in sizes to 3".
- 1/2"-13NC Top Drilling (5/8"-11NC Available).
- Recommended Halyard Diameter – 5/16".
- Stainless Steel Set Screws (3) on sizes to 3-1/2" or Stainless Steel Bolts (3) on sizes 4" and larger are provided.
Technical Details
- Brand - Concord American
- Model - TRK-9300
- Shaft Top Diameter - 2-7/8" - 3"
- Max. Shaft Top Diameter - 3"
- Pulley - Nylon
Similar Stationary Trucks
Based on Max. Shaft Top Diameter: 3"
External Flagpole Trucks
External Flagpole Trucks sit at the top of the flagpole, providing an exposed pulley and rope system for raising and lowering the flag.
All Trucks are designed to accept Balls, Eagles and Finials. Standard Spindle Threading is 1-1/4" NPT (1" NPT and 1-1/2" NPT Spindles available upon request).
Powder Coat Finish Options
BZT = Powder Coat – BronzeTone
BLK = Powder Coat – Black
WHT = Powder Coat – White
CLR = Powder Coat – Clear
External Stationary
Cap Design
Cap Design Trucks install over the top of the flagpole and are attached with anchoring set screws or bolts.
Stationary Trucks are fixed and will not rotate.
External Single Revolving
Spindle Design
Spindle Design Trucks incorporate a threaded spindle which is installed into a female fitting welded into the top of the flagpole.
Revolving Trucks rotate the flag with the wind.
