Finder
Flagpoles
Flagpoles
Components
Monarch Series Flagpole
Internal Cam Cleat (ICC) - Rope Halyard
The Monarch Series from Concord American Flagpole offers commercial-grade flagpoles with the security of an Internal Rope Halyard and Cam Cleat system. Ranging in heights from 20′ to 40′, the concealed halyard and lockable flush mount hinged door delivers project owners the peace of mind provided with 24-7 security.
Standard Specifications
- Patented, Heavy-Duty Gold Anodized Aluminum Ball
- Cast Aluminum Revolving Truck with SEALED Stainless Steel Bearing Assemblies, Aluminum Spindle, Cast Brass Exit Bushing and Removable Hood
- Complete Internal Halyard Assembly
- Rope Halyard – 5/16" #10 Polyester
- Two (2) Stainless Steel Swivel Flagsnaps
- Two (2) Neoprene Flagsnap Covers
- Cam Cleat
- Flush Mount Access Door with Lock and Keys
- Spun Aluminum FC-11 Flash Collar
- Galvanized 16-Gauge Corrugated Steel Ground Sleeve with Steel Grounding Spike
Flush Mount Hinged Door Design
Monarch Flagpoles unite the simplicity of efficient engineering with the aesthetics of a precision cut, rectangular flush mount door design, providing an internal halyard Cam Cleat system that is ideal for low to moderate wind speed areas.
For additional Cam Cleat option flagpoles, see Sentry ISC Raised Reinforced Door Frame and Sentry II IRC Reinforced Welded Door Frame.
Finish Options
Satin Aluminum
Aluminum flagpoles are constructed of Aluminum Alloy 6063, a marine grade alloy that exhibits extremely high resistance to corrosion. On contact with air, aluminum forms a resistant layer of aluminum oxide. This process naturally guards against corrosion, allowing our flagpoles to be left unfinished while ensuring a lifetime of aesthetic beauty.
Our satin aluminum finish is achieved in a multi-pass, mechanical rotary sanding operation utilizing specially formulated abrasives. This attention to detail ensures a consistent, brushed aluminum finish that has become the industry's first choice for low-maintenance and enduring flagpole finishes.
Satin - SAT
Anodized
Standard anodized finishes include clear, dark bronze and black.
Clear Anodized - ACL
Dark Bronze Anodized - ADB
Black Anodized - ABL
Powder Coat
Standard powder coat finishes include clear, bronzetone, black and white.
We can also powder coat in a custom color. Simply provide an RAL color number or color chip sample and we can provide the perfect powder coat color for your next project.
Black Powder Coat - BLK
BronzeTone Powder Coat - BZT
White Powder Coat - WHT
Clear Powder Coat - CLR
Flagpole Shaft Descriptions
Mounting Height
The exposed height in feet above grade and is measured to the top of the of the flagpole shaft. *When truck and ornaments are added, overall height can be greater by 1'-2', which can be relevant in areas with height ordinances. Upon request and at no additional charge, Mounting Heights can be shortened to achieve the desired overall height.
25' Mounting Height Exception
Flagpoles offered in 25' mounting heights are manufactured in a single piece with an overall length of 26'-6". Below grade, 2'-6" will be inserted into the ground sleeve. When the truck and finial are attached, the nominal height of the completed flagpole will be 25'. This industry accepted standard allows shipping in a pup trailer at a significant freight savings. Full 27'-6" shafts are available upon request.
Butt Diameter
The diameter in inches at the base of the shaft.
Top Diameter
The diameter in inches at the very top of the shaft.
Wall Thickness
The thickness of the shaft in inches, varying from .125" to .500".
Single & Multi-Piece Shafts
Flagpoles are available in both single and multi-piece designs. Flagpoles 45' and larger will contain multiple piece shafts based on Mounting Height. Sections can be easily field assembled without any loss of structural integrity, leaving only a hairline joint to indicate that the shaft is not a single piece flagpole.