A standard cast aluminum cleat for securing flagpole halyards. Includes stainless steel mounting screws for easy installation.
Two 1/4"-20NC Stainless Steel Mounting Screws Included
Look up wind speed requirements by City, State or ZIP Code or choose one of the quick select options below. Any flagged flagpole not rated for your selected wind speed will be removed from the results.
Wind Speed is the 3-Second Gust Wind Speed in miles per hour at 33 ft above ground level. Wind speeds correspond to approximately a 7% probability of exceedance in 50 years (annual exceedance probability = 0.00143, MRI = 700 years). This is also known as the Allowable Stress Design Wind Speed (VASD).
Next, choose the flagpole type you need.
Choose the mounting height for your flagpole. This is the height of the flagpole from the ground to the top of the flagpole.
Choose the butt diameter for your flagpole. This is the diameter of the bottom of the flagpole.
Finally, choose the wall thickness for your flagpole. This is the thickness of the wall of the flagpole.
Tip: Choose Skip to compare all viable options or choose 0.125 inch to view the most economical option(s).
Are you sure you want to proceed?
